Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger

Model NO.
SR1
Connection
DN25-DN300
Brand
Apv/Sondex/Gea/Tranter/Funke/API
Plate Thickness
0.5 mm / 0.6 mm
Channel Gasket
Intermediate Gasket
Plate Type
Intermediate Plate
End Plate
0 Holes
Channel Plate
4 Holes
Gasket Material
NBR EPDM FKM EPDM-Ht
Plate Pattern
Herrignbone / Chevron / Corrugated
Plate Material
SS304/SS316/SS316L/Titanium/Alloy C276
Channel Gap
3 mm - 6 mm
Gasket Type
Clip on / Glueless / Glue
Transport Package
Shipping
Specification
150*39*110 cm
Trademark
Propellet
Origin
China Shandong
HS Code
8409911000
Production Capacity
1500
Reference Price
$ 540.00 - 1,798.20
Contact Us

Product Description

 

Product Overview

Gas turbine waste heat recovery SR1 H17 plate heat exchanger
Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger
Propellent Plate heat exchanger consists of a pack of corrugated metal plates, gaskets and a fix frame. The plate pack is assembled and fixed on the frame by tightening bolts. The heat is transferred through the plate between the channels which are sealed by gaskets. Our large selection of plates, plate patterns, and pressing depths enables us to cover all thermal duties with solutions that match the requirements perfectly.

Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger
Product Description
 
Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger
Working Principle 
Passing energy from one media to another
in order to either heat up or cool down the
media, is the basis of heat transfer. Plate
heat exchangers use highly efficient flow
plates to achieve the heat transfer and are
superior to tubular heat exchangers and
other plate heat exchanger designs in
terms of heat trans fer efficiency, space
requirements and ease of maintenance .
 
Propellent Plate Heat Exchanger
Plate Type
Single plate
Flow Channel Between Plates
3.5mm ~12.0mm (Optional depends on working condition)
Plate Thickness
0.4mm ~ 1.0mm
Heat Transfer Plate Material
Stainless steel - 304/304L, 316/316L, 254 SMO, Titanium, Hastelloy C-276, others
Gasket Material
NBR, EPDM, HNBR, HEPDM, NBR-HT, FKM, Viton A, Viton G
Pressure Plate Material
Carbon steel, stainless steel and others on request
Temperature Range
-50ºC ~ +180ºC Varies with the media and gasket selection.
Maximum Pressure
Maximum standard pressure 10 bar / 16 bar
Port Connection
DN32, DN50, DN80, DN125, DN150, DN200, DN250, DN350
Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger Plate Pattern
 
The media flow through the channels of the pattern that is pressed into the heat transmission area of each plate. As such, the patterns have great impact on the heat transfer efficiency of the heat exchanger and must be carefully chosen to accommodate the specific requirements of each thermal duty.
 
The sized of the needed heat transmission area can be reduced if a higher amount of the pressure drop is used. This makes it important to use the allowed pressure drop to the fullest. Some patterns only use a low pressure drop, but offer a lower level of turbulence, while others offer high turbulence in exchange for a high pressure drop. Other patterns have very deep channels, making them suitable for high-viscosity media and media that cause fouling.
 
Plate Material
Available Medium
AISI304, AISI316L
Pure Water, Fresh Water, Mineral Water
Titanium
Sea Water, Mineral Oil, Vegetable Water
254SMO
Dulute Sulphuric Acid etc.
Ni
Caustic Soda with high temperature and concentraction
Hastelloy
Concentration Sulphuric Acid etc.
 
Gasket Material
Temperature Range(ºC)
Hardness
Available Medium
NBR
-20 to 110
-75+/-3
Water, Oil, Acid etc.
EPDM
-30 to 150
80+/-5
Steam, Ammonia, Acid, Glycoletc.
NBR-HT
-30 to 160
85+/-5
Mineral Oil, Thermal Oil
EPDM-HT
-30 to 180
85+/-5
High Tempearture Water
FPM
-55 to 220
80+/-5
High Temperature Oil
Applications

Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger
Alumina      Beer     Bever a ge     Chemical     Dairy     Data center    Marine    Milk      Oil and Gas   
Paper-pulp     Petrochemical     Pharmaceutical     Power-plant     Refrigeration     Waste water

Company Profile

Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger

Heat Exchanger Producation

Gas Turbine Waste Heat Recovery Sr1 H17 Plate Heat Exchanger

Packaging & Shipping

Propellent service

Design/Calculate/Data/Drawings
12 months free warranty and life-long maintenance
Training and Operation Manuel
Top quality, Competitive price, Fast fedback
Package details: standard export plywood case & carton & customizing according to your requirements.

Any requirement and questions, Feel free to contact us!
 

 

Heat Exchanger

GOUV.NE, 2023