Polypropylene PP Plastic Raw Materials Granules for Extrusion and Made Monofilament Yarns

Model NO.
PP
Specification
25kg/bag
Trademark
Sinopec
Origin
China
HS Code
3902100090
Reference Price
$ 899.10 - 900.00
Contact Us

Product Description

Polypropylene PP Plastic Raw Materials Granules for Extrusion and Made Monofilament Yarns

Product Description
Polypropylene
HS Code:3902100090
Polypropylene is a polymer formed by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature and oxidation.

1.Feature:
1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.
2, good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.
3. It has high heat resistance and the continuous use temperature can reach 110-120 °C.
4, good chemical properties, almost no water absorption, and does not react with most chemicals.
5, the texture is pure, non-toxic.
6, electrical insulation is good.


2.Specification:
Number Project Unit H40S Test value Test Methods
1 Melt mass-flow rate(MFR) Nominal value g/10min 37 37.3 GB/T 3862
Deviation ±37
2 Isotactic index   % >=96.0 97.51 GB/T 2412
3 Particle appearance Color grain Pc/kg <=5 0 SH/T 1541-2006
Black grain Pc/kg 0 0
Large and small grains g/kg <=100 0.1
Snake skin grains and trailing grains Pc/kg report 25
4 Impurities and others   Pc/kg no no SH/T 1541-2006
5 Ash   % <=0.030 0.014 GB/T 9345.1
6 Tensile properties Tensile modulus of elasticity(Et)  MPa  >=1200 1250 GB/T 1040  
Tensile yield stress( σ y )   MPa  >=30.0 30.9
Tensile stress atbreak( σ B )   MPa  >=8.0 20.7
Nominal tensile strain at break(ε tB)  %  >=200 566
Test conclusion Qualified
3.Application:
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)

4.Packaging Details:
25kg/ carton or 25kg/bag, or per your requirement

25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container
Polypropylene PP Plastic Raw Materials Granules for Extrusion and Made Monofilament Yarns Polypropylene PP Plastic Raw Materials Granules for Extrusion and Made Monofilament Yarns Polypropylene PP Plastic Raw Materials Granules for Extrusion and Made Monofilament Yarns Polypropylene PP Plastic Raw Materials Granules for Extrusion and Made Monofilament Yarns

 

Plastic Materials

SHENGRIKUAILE.COM, 2023