Piastra ad alta efficienza e refrigeratore d'aria a V per Sistema di raffreddamento del server

Our range of Dry Air Coolers and Air Blast Radiators are designed for commercial and industrial fluid cooling applications.
We offer a wide range of options enabling us to provide the most cost-effective solution for your cooling requirement.

1. Material options
·Heavy-gauge hot-dip galvanized steel is used for unit steel panels and structural elements featuring a zinc aluminium coating.

2. Heat transfer media
- The dry cooler is constructed of staggered and seamless copper tubes (15,9 or 12,7 diameter) with aluminium, rippled and corrugated fins (0,14 or 0,17 thickness). ·2,5 mm fin spacing for optimal air turbulence ·Thick and seamless copper headers and threaded steel connections ·Pressure tested at 15 bar ·Try our options for aggressive environments: special pre-coated anti-corrosion aluminium fins or copper fins (0,2 mm thickness).

3. Air movement system ·Axial fan with exceptionally compact direct drive short integrated motor and fan guard. ·The fan features an impeller and motor and is balanced as a complete unit using dynamic single plane balancing. Balance grade is G6.3. ·Fan and motor totally maintenance free. ·Bearings seals and motor encapsulation for long service life.

 

Raw Material

 

 

TUBE	Copper	Titanium	Aluminum	Carbon steel
	Stainless steel 304	Stainless steel 316	Cu-Ni(90/10)	Cu-Ni(70/30)
FIN	Copper	Aluminum	Stainless steel
	Carbon steel	Titanium
FRAME	Galvanized	Aluminum	Stainless steel

 

TUBES
We make tubes of different diameters, with a greater number of thicknesses and different materials such as copper, stainless steel and cupronickel. The tube expansion, during the flaring phase, allows a perfect contact between the tubes and the fins and as a consequence it assures efficient thermal exchange.

COPPER - Copper tube                                          STAINLESS STEEL - AISI 316L tube                   CURRONICKEL - CuNi10Fe1Mn tube
 

FINS The fins, made of aluminium, prevarnished aluminium or copper, are pressed by means of a particular ondulation that increases the thermal exchange between the air and the fin reducing the load losses on the air side and encouraging at the same time the flow of condensation or defrosting water.

The fins can also be made from 316L stainless steel for installations where the thermal exchange is in aggressive environments such as the food sector or exchangers used in salty environments.

The main geometries, achievable according to the chosen material, are reported following below; besides, according to the application chosen by the customer and to the thickness of the requested strap, it will be possible to make a major or minor pitch between the fins.

PLATES Thanks to its accurate three-dimensional design and to modern punchers and numerical control bending machines, it is possible to make carpentry and structures of different sizes that can be adapted to any construction requirement of the customer.

We promise we use the design software sold by a well-known European HAVC software company.

 

We will send you the 3D drawing, CAD Drawing,data sheet together with the quotation list as you required.

 

 

ISO 9001 Certifications

VRCOOLERTECH CST Company
We specialize in  designing ,  manufacturing  and  exporting  r efrigeration equipments  for the varied industries  since 2004 .
When it comes to building heat exchanger for any application VRCOOLERTECH CST Company has the capability to meet your requirements. If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, CST Company can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.
Our main products:
Commercial heat exchanger
Industrial heat exchanger
Dry cooler Unit cooler
Charge air cooler Compressor cooler(intercooler, aftercooler, oil cooler)

Q1: What is your strength ?
A: Design and manufacture.

Q2: How long is your delivery time?
A:Different products' production time is different. Generally, it needs 10 to 40 working days.

Q3: What is your terms of payment ?
A:50% TT deposit in advance, 50% TT balance before delivery.
We provide Alibaba Trade Assurance Service. Welcome for more advise.

Q4: What's your Main products?
A: Our 3 main products are: Condenser and Evapotator, Industrial air cooler and Unit cooler and Coil.

Q5. How to contact with you ?
A: 24hours online from Trade Manager, quick answer.