BMS 1S 2A 3A li i
on Lifepo4 battery pcm for 3.7V 3.2V battey pack
About the battery BMS
Function: Detect and protect the battery from over-charge ,over-dicharge, over-current short-circuit
,temperature detecting protection and auotmatically voltage balance function
.
About your products,just tell us the relative voltage/ cells/ current A or equipment etc,we will help to recomment the most suitable products for you. or we design for you!
Product description
| PCM Specifications For 3.7V (1 S ) Li-ion Battery Packs | ||||
| LWS-D141S) | ||||
| No. | Test item | Criterion | ||
| 1 | Voltage | Charging voltage | DC:4.2V CC/CV | |
| Balance voltage for single cell | / | |||
| 2 | Current | Balance current for single cell | / | |
| Current consumption | ≤1 0 μ A | |||
| Maximal continuous charging current | 2A | |||
| Maximal continuous Discharging current | 2A | |||
| 3 | Over charge Protection | Over charge detection voltage for single cell | 4.3±0.025V | |
| Over charge detection delay time | 0.5S-1.5S | |||
| Over charge release voltage for single cell | 4.1±0.05V | |||
| 4 | Over discharge protection | Over discharge detection voltage for single cell | 2.50±0.062V | |
| Over discharge detection delay time | 10mS-150mS | |||
| Over discharge release voltage for single cell | 2.90±0.1V | |||
| 5 | Over current protection | Over current detection voltage | 0.15±0.025V | |
| Over current detection current | 6±1A | |||
| Detection delay time | 5ms-15ms | |||
| Release condition | cut load and recharge | |||
| 6 | Short protection | Detection condition | Exterior short circuit | |
| Detection delay time | 200-500us | |||
| Release condition | cut load and recharge | |||
| 7 | Resistance | Protection circuitry(MOSFET) | ≤6 0m Ω | |
| 8 | Temperature | Operating Temperature Range | -40 ~ +65 ºC | |
| Storage Temperature Range | -40~+125ºC | |||