ASTM B209 Temper T6 H112 7050 Aluminum Sheet for Aircraft Components
Model NO.
7050
Surface Treatment
Mill Polished, Bright Hairline Sand Blast
Alloy
Alloy
Payment Term
30% in Advance. Balance Before Shipment
Trade Terms
FOB, CIF, CFR, etc
Key Words
7075 Aluminum Alloy Properties
MOQ
1PC for Stock, 6 Tons for Order
Certificate
MTC, SGS, etc
Delivery Time
20 Days or as Requirement
Length
<8000mm
Width
<2650mm
Transport Package
Wooden Package
Specification
Thickness: 1.0-600mm
Trademark
ZYTC
Origin
CHINA
HS Code
7606122000
Production Capacity
200ton/Mth
Reference Price
$ 3,150.00 - 3,600.00
Description
Product Description
ASTM B209 Temper T6 H112 7050 Aluminum Sheet for Aircraft Components
The 7-series aluminum alloy Al-Zn-Mg-Cu series superhard aluminum is still widely used
in the aviation industry as an ultra-high strength deformed aluminum alloy. Its characteristics
are good plasticity after solid solution treatment, particularly good heat treatment strengthening
effect, high strength below 150 ºC, and particularly good low-temperature strength; Poor welding
performance; Stress corrosion cracking tendency; It requires aluminum coating or other protective
treatment for use. Double aging can improve the ability of alloy to resist stress corrosion cracking.
The plasticity in the annealed and just quenched states is slightly lower than that in the same state
of 2A12. It is slightly better than 7A04, and the static fatigue and notch sensitivity of the plate are
better than 7A04. The density is 2.85g/cm3.
Chemical Properties
| Standard | ASTM, AISI, SUS, EN, JIS, DIN, GB ASME |
| Regular grade |
1Series: 1050, 1060, 1070, 1080, 1100, 1235, etc.
2Series: 2A12, 2A14, 2014, 2024, 2023, 2219, etc. 3Series: 3003, 3004, 3005, 3A21, 3105, etc. 5Series: 5052, 5754, 5083, 5086, 5056, 5652, 5154, 5005, 5454, 5182, etc. 6Series: 6061, 6062, 6063, 6005, 6101, etc. 7Series: 7A01, 7A04, 7005, 7050, 7075, etc. 8Series: 8011, 8079, etc. |
| Surface | Hairline, Oxidation, Mirror, Embossed, Anodized, etc |
| OEM Service | Perforated, Cutting special size, Doing flatness, Surface treatment, etc. |
| Temper | F, O, T6, T651, T7451, H112 |
| Thickness | 1.0mm~600 mm |
| Width | <2650mm, or be required |
| Length | <8000mm, or as required |
| Application |
|
| Kind attention | The specifications can be customized according to customer requirements. |
The 7-series aluminum alloy Al-Zn-Mg-Cu series superhard aluminum is still widely used
in the aviation industry as an ultra-high strength deformed aluminum alloy. Its characteristics
are good plasticity after solid solution treatment, particularly good heat treatment strengthening
effect, high strength below 150 ºC, and particularly good low-temperature strength; Poor welding
performance; Stress corrosion cracking tendency; It requires aluminum coating or other protective
treatment for use. Double aging can improve the ability of alloy to resist stress corrosion cracking.
The plasticity in the annealed and just quenched states is slightly lower than that in the same state
of 2A12. It is slightly better than 7A04, and the static fatigue and notch sensitivity of the plate are
better than 7A04. The density is 2.85g/cm3.
| Alloy | Si ( % ) | Fe ( % ) | Al ( % ) | Cu ( % ) | Mn ( % ) | Mg ( % ) | Cr ( % ) | Zn ( % ) | Ti ( % ) | V ( % ) | Ni ( % ) |
| 1050 | 0.25 | 0.4 | 99.5 | 0.05 | 0.05 | 0.05 | -- | 0.05 | 0.03 | -- | -- |
| 1060 | 0.25 | 0.35 | 99.6 | 0.05 | 0.03 | 0.03 | -- | 0.05 | 0.03 | 0.05 | -- |
| 1070 | 0.2 | 0.25 | 99.7 | 0.04 | 0.03 | 0.03 | -- | 0.04 | 0.03 | -- | -- |
| 1080 | 0.25 | 0.4 | 99.5 | 0.25 | 0.05 | 0.05 | -- | 0.07 | 0.05 | -- | -- |
| 1100 | 0.95 Si+Fe | 99 | 0.05-0.2 | 0.05 | -- | -- | 0.1 | -- | -- | -- | |
| 1235 | 0.65 Si+Fe | 99.35 | 0.05 | 0.05 | 0.05 | -- | 0.1 | 0.06 | 0.05 | -- | |
| 2A12 | 0.5 | 0.5 | Rem. | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2A14 | 0.6~1.2 | 0.7 | Rem. | 3.9~4.8 | 0.4 ~ 1.0 | 0.4 ~ 0.8 | -- | 0.3 | 0.15 | -- | 0.1 |
| 2014 | 0.6~1.2 | 0.7 | Rem. | 3.9~4.8 | 0.4 ~ 1.0 | 0.4 ~ 0.8 | -- | 0.3 | 0.15 | -- | 0.1 |
| 2024 | 0.5 | 0.5 | Rem. | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2023 | 0.2 ~ 0.8 | 0.7 | Rem. | 3.5~4.5 | 0.4 ~ 1.0 | 0.4 ~ 0.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2124 | 0.5 | 0.5 | Rem. | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2219 | 0.2 | 0.3 | Rem. | 5.8~6.9 | 0.2~0.4 | 0.02 | 0.1~0.25 | 0.1 | 0.29~0.1 | 0.05~0.25 | -- |
| 3003 | 0.6 | 0.7 | Rem. | 0.05-0.2 | 1.0-1.5 | -- | -- | 0.1 | -- | -- | -- |
| 3004 | 0.3 | 0.7 | Rem. | 0.25 | 1.0-1.5 | 0.8-1.3 | -- | 0.25 | -- | -- | -- |
| 3005 | 0.6 | 0.7 | Rem. | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | 0.25 | 0.1 | -- | -- |
| 3105 | 0.6 | 0.8 | Rem. | 0.3 | 0.5~0.9 | 0.5~0.8 | -- | 0.25 | 0.1 | -- | -- |
| 5A06 | 0.4 | 0.4 | Rem. | 0.1 | 0.5 ~ 0.8 | 5.8~6.8 | -- | 0.2 | 0.02 ~ 0.1 | -- | -- |
| 5005 | 0.3 | 0.7 | Rem. | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.25 | -- | -- | -- |
| 5010 | 0.4 | 0.7 | Rem. | 0.1 | 0.15~0.4 | 0.6~1.4 | 0.15 | 0.3 | 0.15 | -- | -- |
| 5050 | 0.4 | 0.7 | Rem. | 0.2 | 0.1 | 1.1-1.8 | 0.1 | 0.25 | -- | -- | -- |
| 5052 | 0.25 | 0.4 | Rem. | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | -- | -- | -- |
| 5657 | 0.08 | 0.1 | Rem. | 0.1 | 0.03 | 0.6~1.0 | 0.03 | 0.05 | -- | 0.05 | -- |
| 5083 | 0.4 | 0.4 | Rem. | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | -- | -- |
| 5254 | 0.45 Si+Fe | Rem. | 0.05 | 0.01 | 3.1~3.9 | 0.15~0.35 | 0.2 | 0.05 | -- | -- | |
| 5154 | 0.25 | 0.4 | Rem. | 0.1 | 0.1 | 3.1~3.9 | 0.15~0.35 | 0.2 | 0.2 | -- | -- |
| 5252 | 0.08 | 0.1 | Rem. | 0.1 | 0.1 | 2.2-2.8 | -- | 0.05 | -- | -- | -- |
| 5454 | 0.25 | 0.4 | Rem. | 0.1 | 0.5-1.0 | 2.4-3.0 | 0.05-0.20 | 0.25 | 0.2 | -- | -- |
| 5754 | 0.4 | 0.4 | Rem. | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | -- | -- |
| 5456 | 0.25 | 0.4 | Rem. | 0.1 | 0.40~1.0 | 4.7~5.5 | 0.05~0.20 | 0.25 | 0.2 | -- | -- |
| 5457 | 0.08 | 0.1 | Rem. | 0.2 | 0.15-0.45 | 0.8-1.2 | -- | 0.05 | -- | -- | -- |
| 5086 | 0.4 | 0.5 | Rem. | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | 0.15 | -- | -- |
| 6003 | 0.35~1.0 | 0.6 | Rem. | 0.1 | 0.8 | 0.8~1.5 | 0.35 | 0.2 | 0.1 | -- | -- |
| 6013 | 0.6-1.0 | 0.5 | Rem. | 0.6-1.1 | 0.2-0.8 | 0.8-1.2 | 0.1 | 0.25 | 0.1 | -- | -- |
| 6061 | 0.4-0.8 | 0.7 | Rem. | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | -- | -- |
| 6063 | 0.20-0.6 | 0.35 | Rem. | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | -- | -- |
| 6082 | 0.7~1.3 | 0.5 | Rem. | 0.1 | 0.4~1.0 | 0.6~1.2 | 0.25 | 0.2 | 0.1 | -- | -- |
| 6005 | 0.2 | 0.35 | Rem. | 0.15 | 0.2~0.5 | 0.4 ~ 0.5 | 0.1 | 0.25 | 0.1 | -- | -- |
| 6101 | 0.3~0.7 | 0.5 | Rem. | 0.1 | 0.03 | 0.35~0.8 | 0.03 | 0.1 | -- | -- | -- |
| 7A04 | 0.5 | 0.5 | Rem. | 1.4~2.0 | 0.2 ~ 0.6 | 1.8~2.8 | 0.10~0.25 | 5.0~7.0 | 0.1 | -- | -- |
| 7050 | 0.12 | 0.15 | Rem. | 2.0~2.6 | 0.1 | 1.9~2.6 | 0.04 | 5.7~6.7 | 0.06 | -- | -- |
| 7005 | 0.35 | 0.4 | Rem. | 0.1 | 0.2~0.7 | 1.0~1.8 | 0.06~0.20 | 4.0~5.0 | 0.01~0.06 | -- | -- |
| 7072 | 0.7 Si+Fe | Rem. | 0.1 | 0.1 | 0.1 | -- | 0.8-1.3 | -- | -- | -- | |
| 7075 | 0.4 | 0.5 | Rem. | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | -- | -- |
Characteristics of 7075 aluminum plate:
1. High strength heat-treatable alloy.
2. Good mechanical performance.
3. Good usability.
4. Easy to process and good wear resistance.
5. T7351 state enhances corrosion and fracture resistance
6. High strength materials used for high-pressure structural components.
Detailed Description
The main uses of 7075 aluminum plate:
Applications in aviation fixtures, trucks, tower buildings, ships, pipelines, and other
structures that require strength. For example: aircraft components, gears and shafts,
fuse parts, instrument shafts and gears, missile parts jump valve parts, turbines, keys,
aircraft, aviation, and defense applications.
Packaging
Shipping
Packaging Details:
1. Standard export seaworthy package.
2. It can packed by container or bulk vessel.
3. Packed as customers requirement.
Delivery:
Shipping Method: Sea, Air, Expressway, Railway
Port: Tianjin Port
Quality Inspection
Main Equipment
Production Process
FAQ
1. Who are we?
We are based in Tianjin, China . Our company sell s to Southeast Asia , North America, Eastern Europe,
Western Europe, Northern Europe, Oceania, South America, Africa.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. What can you buy from us?
1Series: 1050, 1060, 1070, 1080, 1100, 1235, etc.
2Series: 2A12, 2A14, 2014, 2024, 2023, 2219, etc.
3Series: 3003, 3004, 3005, 3A21, 3105, etc.
5Series: 5052, 5754, 5083, 5086, 5056, 5652, 5154, 5005, 5454, etc.
6Series: 6061, 6062, 6063, 6005, 6101, etc.
7Series: 7A01, 7A04, 7005, 7050, 7075, etc.
8Series: 8011, 8079, etc.
4. What if products have some quality problem?
This situation rarely happen due to we have very very restrict quality control on every products.
Contact us immediately and we believe we can solve it out with your satisfaction.
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, CFR, DDP;
Accepted Payment Type: T/T, L/C, Western Union, etc;
Language Spoken: English, Chinese, etc.
Aluminum Sheet
-
WATER PUMP 2W1223 aftermarket parts for excavators,wheel loaders,bulldozer,backhoe,skid steer loader
High Quality OEM/ODM Custom Kick Scooter Parts & Accessories Alloy Core PRO Stunt Foot Pedal Balance Trick Scooter Wheels 110mm
25kVA V2003-T- E2bg Engine Kubota DC Generator Diesel Generator for Telecom
Africa Sinotruk HOWO 6*4 and 8*4 Used Dump Truck
2.4G Stunt Car Twist Electric Climbing Car Gesture Sensing Cool Robot Toy Remote Control Car
Fashion Waterproof Kindergarten PVC Bag Backpack Cartoon Student Schoolbag for Kids Childrens
Full Threaded Stud Bolt with Nuts and Washers A193 B7m/ A194 2hm Assembled Factory Outlet
High Strength Easy Processing 7005 Aluminum Sheet for Heat Exchanger
High Strength Al 7050 7075 T6 T651 T7451 0.3mm 0.8mm 3mm Aluminium Sheet 3003 5A06 5052 5083 A5052 H36 H32 Aluminum Alloy Plate
Linghein High Pressure Silent China Rotary Screw Air Compressor Machine Laser Cutting Gas Portable Air Compressor
A193 B7 Thread Rod/Extension Rod/ A194 2h Threaded Rod
Stainless A2 A4 304 316 A2-70 A4-80 U-Bolt Fastener with Hex Nut DIN3570 M24 M30 M36 M42 M48
Xk9350 CNC Roller Notching and Logo Making Machine
(WD6239) New Japanese Cute Lattice Schoolbag for Primary School Students Female Korean Version of The Trend Campus Backpack Five-Piece Set Backpack Wholesale
Products Wholesale Children Plastic 6023 Radio Control Twisting Car Toy 2.4GHz 1/12 Scale High Speed Double Sided Electric RC Stunt Car for Kids
Matt Stainless Steel Coil/ 001mm Stainless Steel Coil/Tisco Stainless Steel Coil/S31803 Stainless Steel Coil/Stainless Steel Checkered Coil
GOUV.NE, 2023