Helpful tips on Generator Set Fault
|
When fault occurs during generator set running,could do primary judgement according to following tips.
|
Icon
|
Indicator Light
|
Reason
|
Fault Analysis and Solve Method
|
High Water Temperature Alarm
|
High Water Temperature Alarm
|
When water Temperature has risen to a level higher than or equal to the sensor setting,the light is on.
|
Normally,it is caused by lack of Water or Oil Shortage,or Overload. ----Should Automatically Shutdown Generator set Immediately.
|
Low Oil Pressure Alarm
|
Low Oil Pressure Alarm
|
When water Temperature has risen to a level higher than or equal to the sensor setting,the light is on.
|
Normally,it is because of lack of Oil or Lubrication System Failure which caused by refueling or replacing the Oil Filter.----- When occurs this fault,should automatically shutdown generator set immediately.
|
Low Fuel Level Alarm
|
Low Fuel Level Alarm
|
When Fuel level has been detected by sensor fitted to the daily tank,the light is off.
|
Normally,it caused by lacking of Water or Oil Shortage,or Overload.-----When occures this Fault,should automatically shutdown Generator set Immediately.
|
Battery Charger Fault Alarm
|
Battery Charger Fault Alarm
|
The Charing System has fault while engine still running,the light is off.
|
Battery Charging System Fault Caused.---The light in on at the initial Start,when the charger reaches a certain speed,the light is off.---This Failure will not lead to Automatic Shutdown Generating Unit.
|
Crank Failure Alarm
|
Crank Failure Alarm
|
When Generator set fail three times(or six times) in arow starting,the light is on
|
It is caused by Oil Supply System or Re-Start System Failure.
|
Overload or Breaker Tripping Alarm
|
Overload or Breaker Tripping Alarm
|
When Overloading or Short Circuit,the light is on. Tripping Circuit Breaker cause generator set load out.
|
For this fault,it needs to load or unload some parts to eliminate short-Circuit,and then re-close the circuit Breaker.
|