Hollow Plastic Blow Molding Full Automatic Double Extrusion Machine (JMX45D)
Model NO.
JMX45D
Vitta
High Pressurevitta
Capacity
Depends on Product
Hydraulic Pump
Adopt Double-Lamina Pump
Warranty
12months
Material
SUS304/SUS316L
After Sale Service
Engineers Available to Service Overseas
Transport Package
Film with Steel Frame
Specification
ISO9000: 9001; CE
Trademark
King Machine
Origin
China
HS Code
84773000
Production Capacity
10sets/Month
Reference Price
$ 20,250.00 - 22,500.00
Description
Product Description
Product Description
Automatic Plastic bottle Blow Molding Machine extrusion blow moulding machine
Bggest factory for blow molding machine in China, we have already exported to over 60 countries in the world, like America, England , Sri Lanka, Italy Switzerland, Newzealand, Egypt. etc.
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.
A.Brief Introduction
fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Bggest factory for blow molding machine in China, we have already exported to over 60 countries in the world, like America, England , Sri Lanka, Italy Switzerland, Newzealand, Egypt. etc.
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.
A.Brief Introduction
fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
|
Basic
parameter |
Material | PE.PP... |
|
||
| Max.product volume | 5L | ||||
| Cycle time | 300pcs | ||||
| Measurement | LXWXH=3.5x2.2x2.8 (meter) | ||||
| Weight | 6T | ||||
| General power | 33.9KW | ||||
|
Average power
consumption |
22KW/H (The is the exactly power consumption) | ||||
|
Plasticizing
system |
Specification | extrusion system can be applicable to various of raw material, plasticizing capability is good and output is high,transducer adjust speed,collect temperature-control signals and prevent the screw from cold starting |
|
||
| Speed reducer | hard-teeth, low noise and wear-resistant speed reducer | ||||
|
Machine barrel
screw |
Ø70mm,L/D=24, 38CrMoALA high quality nitriding steel | ||||
| Plasticizing | 85Kg/H(HDPE) | ||||
| Heating zone | 4 zone | ||||
| Heating power | 16KW/H | ||||
|
Extrude motor
power |
three phase a synchronism(380V.50HZ)
|
||||
| cooling fanner | 4 zone power:85W | ||||
|
Extrusion
system |
Specification | Patented central material feeding mold head that is quick in changing colors | |||
| Die head | 40Cr high quality nitriding steel | ||||
| Structure of die head | Shan Tou | ||||
| Mold center distance | -- | ||||
|
Max diameter of
die heat |
Ø145mm | ||||
| Heating zone | 4 zone | ||||
| Heating power | 16KW | ||||
|
Opening
and clamping mold |
Specification | Gear wheel and rack in-phase aim at twin shaft clamping device and cylinder | |||
| clamping force | 105KN | ||||
| Distance of mold platen | 188-538mm | ||||
| mold platen dimension | WXH:338x450mm | ||||
| Max mold dimension | WXHX:450x500 | ||||
| mold fix mode | bolt compaction | ||||
|
Electric
control system |
Specification | PLC.colo.touch screen,standardization blowing shaping machine control system (MITSUBISHI programmable controller) |
|
||
| human-machine | color touch screen,trouble auto alarm, diagnose the system | ||||
| Temperature control | self-regulation | ||||
|
Temperature
control |
adopt Japanese Mitsubishi PLC control system | ||||
| protection function | Automatic alert and breakdown feedback double protection of mechanical apparatus | ||||
|
Hydraulic
system |
Specification | proportion pressure controller changing direction quickly and softly | |||
| human-machine electromotor | three phase a synchronism (380V,50HZ),11KW | ||||
| Hydraulic pump | adopt double-lamina pump | ||||
| Hydraulic valve | imported hydraulic components | ||||
| Vitta | high pressureVitta | ||||
| system pressure | 60Kg/cm² | ||||
| cooling mode | Water-cooled | ||||
|
Pneumatic
system |
Specification | imported and famous brand pneumatic pressure | |||
| Air pressure | 0.6Mpa | ||||
| Air | 0.7M 3 /min | ||||
| Valve | FESTO | ||||
|
Cooling
system |
Specification | mold,barrel,oil box adopt independentcooling waterway | |||
| cooling medium | water | ||||
| Water flux | 60L/min | ||||
| Water pressure | 0.3MPa | ||||
Blow Molding Machine
-
Package Sewage Treatment Plant, Hospital Wastewater Treatment
Bulk Pure Ascorbic Acid Vitamin C Powder
Nature Herbal Cinchona Extract Quinine 98% Powder CAS 130-95-0 with Best Price
Newly Design Magnetic Track Light Rail DC48V LED Ceiling Spot Down Light
Sedex Factory Made Fresh Food Vegetables Keeping Storage Bag
Factory Price Sell High Quality Prostaglandin E1 Pge1 Powder
Energy Saving, Single Stage Horizontal Centrifugal Pumps, Water Treatment , Industry, Spinning
250lph Reverse Osmosis Water Purification System Drinking Water Treatment
Methyl Methacrylate Crosspolymer 99.8% MMA
Inflatable Body Bumper Jump Ball Manufacturer
Wholesale PU Anti Stress Ball American Football Rugby Style Toy
Reusable Silicone Laryngeal Mask CE Certification Lma with Cuff 41 Times Made in China Fushan Factory Medical
Ascorbic Acid Vitamin C Food Grade
Candy, Dates, Nuts, Rice Automatic Rotating Bag Food Packaging Machines/Rice Machine/Plastic Bag Filling Machine/Pouch Packing Machine
C6h8o6 Professional Supplier Vitamin C Ascorbic Acid CAS 50-81-7
Mbbr PE04 Used for Domestic Sewage Treatment and Environmental Purification
GOUV.NE, 2023