Test Property | Requirements(Standard) | Test Method | Test Result | Final Result | |||
Thickness of the element, T | T average≤0.5mm, relative to nominal value, T max-T min≤0.5mm |
EN13329
Annex A |
T nominal value=8mm |
T
average
=8.15mm |
T max
=8.3mm |
T min
=8mm |
Qualified |
Length of the surface layer, L | For the nominal values given, no measured value shall exceed: L≤ 1500mm; L≤0.5mm |
EN13329
Annex A |
L nominal value= 1218mm |
L average= 1217.95mm |
Qualified |
||
Width of the surface layer, W | W average ≤ 0.10mm, relative to nominal value, W max -Wmin ≤ 0.20mm |
EN13329
Annex A |
W nominal value=199mm |
W average
=198.99mm |
W max
=199.02mm |
W min
=198.96mm |
Qualified |
Squareness of the elements, Q |
Q max ≤ 0.20mm |
EN13329
Annex A |
Q max =0.12mm |
Qualified |
|||
Straightness of the surface layer, S |
S max ≤ 0.30mm/m |
EN13329
Annex A |
S max = 0.16mm/m |
Qualified |
|||
Flatness of the elements, F |
Maximum single values: Fw concave ≤ 0.15%, Fw convex ≤ 0.20%, F l
concave
≤ 0.50%, F l convex ≤ 1.00% |
EN13329
Annex A |
Fw concave=0.10% |
F l concave=0.20% |
Qualified |
||
Openings between elements, O | O average ≤ 0.15mm, O max ≤ 0.20mm |
EN13329
Annex B |
O average= 0.05mm |
O max = 0.15mm |
Qualified |
||
Height difference
between elements, H |
H average ≤ 0.10mm, H max ≤ 0.15mm |
EN13329
Annex B |
H average= 0.05mm |
H max =0.10mm |
Qualified |
Test Property | Requirements(Standard) | Test Method | Test Result | Final Result | |
Dimensional variations after changes in
relative
humidity δL, δW |
δL average ≤ 0.9mm, δW average ≤ 0.9mm |
EN13329 Annex C |
δL average = 0.5mm |
δW average =0.7mm |
Qualified |
Light fastness |
Blue wool scale, ≥ Level 6 |
EN ISO 105-B02 |
Level 6 |
Qualified |
|
Surface soundness |
≥1.00N/mm2 |
EN13329
Annex D |
>1.00N/mm2 |
Qualified |
|
Abrasion resistance |
Class 32,AC4 |
EN13329
Annex E |
Average IP-value:4000,Abrasion class AC4, Class 32 |
Qualified |
|
Impact resistance |
IC1 |
EN13329
Annex F |
Large diameter ball 1600mm, small diameter ball: 8N. Clasification: IC1 |
Qualified |
|
Resistance to staining |
5,(groups 1 and 2)
4, (group 3) |
EN 438 |
4,(group 3 ) |
Qualified |
|
Effect of a furniture leg | No damage shall be visible, when tested with foot type 0 |
EN424 |
No visible changes |
Qualified |
Effect of a castor chair |
No damage or visible change in appearance |
EN425 |
No visible changes |
Qualified |
Static indention |
No visible damage |
EN433 |
No visible changes |
Qualified |
Thickness swelling |
≤18.0% |
EN13329
Annex G |
12.00% |
Qualified |
Fire Resistance |
Flame retardant B1 |
DIN 4102 |
Flame retardant B1 |
Qualified |
Resistance to Cigarette burns |
≥Degree 4 |
EN438 |
Degree 5(NO. visible change) |
Qualified |
Formaldehyde Release |
|
EN717-1 |
1.0mg/L |
Qualified |