China Fabrik Gute Qualität Lieferanten Elektrischer Kamin Gebläse Cross Flow Mini-Tangentialventilator

China Factory Good Quality Suppliers Electric Fireplace Blower Cross Flow Mini Tangential Fan
Model:PC65B24750L

combine 30~80mm diameter cross flow impeller with one single piece length maximum to 65mm, with AC and DC power supply EC green technology motor, with aluminum die cast fan frame, with anti-vibration rubber damping pad system, with ball bearing and sleeve bearing, maximum entire tangential fan length goes up to 1190mm at single, double and triple sections harmoniously connected together makes it possible to achieve a very high airflow throughput ratio with extremely low wind noise with quiet three-core sin-wave integrated commutation electronics motor controller circuit and low air flow velocity. Cross flow blowers are available for home indoor stove, fireplace, oven, wood burner underfloor convectors, air doors, air curtains, air conditioners and heaters' cooling and ventilation at extremely shallow, flat design to satisfy home appliances' nice outlooking and slim features that market requirements and consumer calling for.
 
Low noise with high air flow rates and low back pressures, compact slim design with anti-vibration rubber mechanical soft connection system, moisture proof and water proof versions are available for entire range tangential blowers   with integrated and intelligence EC technology motor with PWM signal and 0~10V analog voltage to adjust power, and ErP2015 (Energy-related Products) directive conformity.
 

Impeller Sizes:   from 30mm to 80mm diameter;

Sound Level:   from 32 dBA to maximum 48 dBA according different rotation speed;

Airflow:   maximum to 600 CMH, Cubic Meter per Hour, equal to approx. 353 CFM , Cubic Feet per Minute;

Air Pressure:   Maxim to 80 Pa, equal to 8.16 mm H2O and to 0.32  inches H2O;

Power:   Maximum motor input power goes to 100W  motor diameter 80 mm.
 

General Characters:

Environmental Characters:

Electrical Protection
 

Environmental Characters

Performance Curve:
 

Testing Condition
Input Voltage----Operating voltage (24 VDC)
Temperature-----Room temperature
Humidity---------65%RH
Test distance-----1m

Outline Drawing

Note
1. Connection line 3X ( Red , Black, White AWG22#);
Red=+24VDC, White=0-10VDC, Blue=GND .

Safety Requirements

1. Make sure that the metal casing of the stator connected to the ground before being powered on.
2. If the fan doesn't work after been powered on, please check the speed control input voltage, it may not be well connected. To prevent the suddenly start of the fan to hurt hands or other personal injury; do not touch the impellers or rotor when the power is on.
3. Fan needs a few seconds to start after being powered on. To prevent personal injury, do not touch the impellers or rotor when the power is on or in a low speed.
4. Unless they are instructed by the person(s) responsible for their safety, those who are lack of physical, mental or sensory capacities and proper practical experience or expertise cannot use this appliance. Please do not let the children play with this product.
5. If the power cord be damaged, the power cord must be replaced by the manufacturer in order to avoid accident of the proxy service personnel or the equivalent qualification maintenance personnel.
6. As an integral part of the fan, this DC motor cannot be used alone without impeller or load.
7. Please carefully read this technical specification before using the product.

Products of the same series

Q:How about the delivery time ?
A:Within 25 days after we receive the order.