| Truck Specification | ||
| Chassis model | CL5160TQZC5 | |
| Cab | FAWone and a half row cab, with power steering. Electronic flameout , left hand drive | |
| Driving Type | 4*2 | |
| Max Speed (km/h) | 101 | |
| Overall dimension ( mm ) | 8860×2500×2975(mm) | |
| Mass in working order ( kg ) | 13790 | |
| GVW ( kg ) | 15795 | |
| Wheelbase ( mm ) | 5800 | |
| F/R track base ( mm ) | 1900/1800 | |
| F/R overhang ( mm ) | 1400/1660(mm) | |
| Approach/Departure Angel | 18/8 | |
| Tire | 10.00R20 | |
| Clutch | Single-plate dry diaphragm spring clutch | |
| Steering | Hydraulic steering with power assistance | |
| Gear box | 6-speed | |
| Bridge | Front axle | 6T |
| Rear axle | 10T | |
| Enging | Model | CA4DK1-22E51 |
| Horse power | 220HP | |
| Displacement | 4764L | |
| Braking system | Service Brake | Compressed air brake |
| Park Brake | Spring energy | |
| Eletric system | 24v | |
| Upper-Body specification | ||
| Hydraulic Under Lift at Rear | ||
| Fully Retracted Lifting weight(kg) | 8000 | |
| Fully Extend Lifting Weight(kg) | 4420 | |
| Max. Rated towing weight(kg) | 15950 | |
| Max effective length of boom(mm) | 1170-2420 | |
| Extension traveling of boom (mm) | 1250 | |
| Boom structure | ||
| Maximum lifting height(mm) | 4830 | |
| Fully Retracted Lifting weight(kg) | 12000 | |
| Fully Extended Lifting weight(kg) | 5750 | |
| Extension traveling of hoisting boom(mm) | 2900 | |
| Hydraulic winches & steel cables | ||
| Type: | Planetary type | |
| Quantity (set) | 2 | |
| Max. Pulling power of winch (kN) | 80 | |
| Length of steel cable(m) | 30 | |
| Speed of winch (m/min) | 5 | |
| Diameter of winch(cm) | 0.16 | |
| Hydraulic Outriggers | ||
| Quantity | 2 | |
| type | in-built with power elevation &extension | |
| Power take off | ||
| Type | PTO drive from transmission | |
| Wrecker Operation | ||
| Description | Panel board comprising joysticks and hydraulic meters installed in a suitable place out of crew cabin. | |
| Hydraulic System | ||
| Description | uitable capacity gear pumps for boom movement, telescoping cylinder, power steering and control valves & control system shall be with adequate size oil reservoir, integral oil cooler, valves etc. | |
| Safety Device | ||
| Auto brake for winch | Automatic safe brake in case winch / Engine fail. | |
| Hydraulic valves | Necessary hydraulic pressure relief & lock valve/ valves | |