| 
EDR-75 75W Rail Type Switching Power Supply
 | ||||
| 
Project
 | 
Technical index
 | |||
| 
Output
 | 
DC voltage
 | 
12V
 | 
24V
 | 
48V
 | 
| 
Rated current
 | 
6.3A
 | 
3.2A
 | 
1.6A
 | |
| 
Rated power
 | 
75.6W
 | 
76.8W
 | 
76.8W
 | |
| 
Ripple and noise 
 | 
<120mV
 | 
<120mV
 | 
<150mV
 | |
| 
Voltage accuracy
 | 
±2%
 | 
±1%
 | ||
| 
Output voltage regulation range
 | 
±10%
 | |||
| 
Load adjustment rate
 | 
±1%
 | |||
| 
Linear adjustment rate
 | 
±0.5%
 | |||
| 
Input
 | 
Voltage range
 | 
90-264VAC 47hz-63hz (127vdc-370vdc: DC input can be realized by connecting AC / L +, AC / N (-))
 | ||
| 
Efficiency (typical) 
 | 
>86%
 | 
>88%
 | 
>89%
 | |
| 
Working current
 | 
<1.45A 110VAC <0.9A 220VAC
 | |||
| 
Impulse current
 | 
110VAC 20A, 220VAC 35A
 | |||
| 
Start, rise, hold time
 | 
500ms,70ms,32ms :110VAC/500ms,70ms,36ms :220VAC
 | |||
| 
Protect
 | 
overload protection
 | 
105% - 150% type: protection mode: automatic recovery after removing the abnormal condition of constant current mode
 | ||
| 
Overvoltage protection
 | 
When the output voltage is more than 135%, the output will be turned off. It will recover automatically after the abnormal
 
conditions are removed
 | |||
| 
Short circuit protection
 | 
+VOWhen the abnormal condition of output is released, it will recover automatically
 | |||
| 
Environmental
 | 
Working temperature and humidity
 | 
-10ºC~+60ºC;20%~90RH
 | ||
| 
Storage temperature and humidity
 | 
-20ºC~+85ºC;10%~95RH
 | |||
| 
Safety/EMC
 | 
Withstand voltage
 | 
Input output: 3kVac input ground: 1.5kVac output ground: 0.5kvac for 1 minute
 | ||
| 
Leakage current
 | 
<1mA/240VAC
 | |||
| 
Isolation resistance
 | 
Input output, input shell, output shell: 500VDC / 100M Ω
 | |||
| 
Other
 | 
size
 | 
32*125*113mm
 | ||
| 
Net weight / gross weight
 | 
500/600g
 | |||
 
